Wednesday 24 August 2016

Weighing Waste? See you at the RWM!

Only three weeks until the biggest exhibition for the waste and recycling industry takes place at the NEC.


And once again we’re delighted to be at the RWM, stand 5P151 from 13-15 September if you’d like to come and chat.

There isn’t much waste handled these days that isn’t weighed at some stage and if it’s bulk weighing or material that needs weighing on the vehicle, we’ve probably dealt with it before.

No one system can serve every requirement though which is why the RWM is such a good opportunity to chat about your requirements. The right system for keeping caged tippers legal probably won’t be the right system for monitoring throughput at a recycling centre.

And our customers include both those applications and more.

If you have an issue with keeping collection vehicles legal when out on the road, then the Axtec OnBoard Load Indicator will monitor weights throughout the round.

If it’s maximising loads on bulk vehicles taking waste for processing or monitoring throughput for statistical purposes, then the Axtec Dynamic Axle Weighbridge will provide the information you need.

But both of those systems are capable of much more than just weighing axles.

Axtec OnBoard can output detailed information to a tracking device – individual axle weights, gross weights, overload alarms – which may then be reported back to base.

The Dynamic Axle Weighbridge can be Stamped as a Public Weighbridge, the only one of its type which can, which means you can offer it to other hauliers and legally charge them for the use of it thus adding a revenue stream to your operation.
Latest Touch Screen Technology on show at RWM

This is the same system that is the choice of the government body DVSA (Driver & Vehicle Standards Agency) for its national network of vehicle weight enforcement weighbridges and is certified as the most accurate system of its type in the world.

Both these systems make use of the latest touch screen and wireless technology making them simple to use, reliable and difficult to break. Vital when working in the harsh world of recycling.

The RWM is an excellent opportunity to discuss the latest thinking and technology in recycling and we’ll be there with the latest products in our range.


So if your shopping list includes vehicle weighing equipment come and see us, stand 5P151 remember, and let’s talk.

Wednesday 10 August 2016

How do you spot an overloaded vehicle?

How do you know whether your vehicles are overloaded?


Just looking at them can be deceiving even to the most experienced eye. A while ago we were asked to check weigh a Luton van kitted out with TV production equipment. The load never changed other than fuel and the driver’s lunch box so investing in their own equipment wasn’t cost effective. So we offered to weigh it on some weighpads for them.

Arriving at their premises the vehicle was ready and waiting for us and even before we got out of the car we commented on how low it looked at the back and how the rear axle was definitely going to be overloaded at least.

But having set the weighpads up on level ground and carefully weighed the vehicle, everyone was surprised to find that both axles and the gross weight were just within legal limits. Even our experienced eye had been fooled.
Axtec OnBoard Load Indicator - no guessing weights here!

Back in the days when DVSA were called Vehicle Inspectorate, overloaded vehicles approaching the enforcement site at Beattock Summit were easy to spot as they always struggled to pull up the hill but these days with modern engines, any vehicle climbs that bank with ease and the overloaded ones are not so easy to spot.

So if experienced ‘overload spotters’ can be fooled, how does the average operator know if their vehicles are legal when they leave the yard?

The only sure fire way to ensure legality is to install the correct axle weighing system for your fleet profile and operation.

And as we offer the widest range of systems available from one manufacturer, we can offer impartial advice on the best system for your job.

Running service engineers vans out on the road all day – then Axtec OnBoard would be a useful tool.
Need to invoice customers for bulk materials on artics – then the Trade Approved Axtec Dynamic Axle Weighbridge would be the best option.

Or maybe you need something for spot checks or driver training then a set of portable weighpads would be a good option.

There are many factors to consider – yard space, information required, fleet profile, product mix – with a free in-depth survey to really understand your operation you can be sure that any system you buy will be the right one for your job.


And remove the guesswork that even the best can get wrong.